At a time when there is increasing government and local council regulation on building projects and the accompanying architectural hardware - in July 2007, Guardian Lock & Engineering Co. Ltd. successfully fire tested* it's entire range of UK manufactured locks & latches to BS EN 1634-1, for use on 30 minute & 1 hour fire doors.

The company took this step to help architectural hardware specifier's & suppliers whilst scheduling, as they can have confidence that choosing any of Guardian's UK manufactured locks & latches will allow them conform to fire safety regulations*. 

*Subject to there use on doors of the appropriate construction, and with the appropriate hardware and fittings.
 

 G7000 Y7000      Euro-profile cylinder mortice sashlock
OPERATION: Latchbolt operated by lever handle from either side. Deadbolt operated by key from either side using a double cylinder or by key outside and thumb turn inside using a single cylinder with turn.
SPECIFICATION:
CASE.
Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons. 76mm and 101mm sizes pierced to accept 38mm centre horizontally and diagonally opposed bolt through fixing furniture;
63mm size pierced diagonally only.
STRIKER PLATE. Type A.
LATCHBOLT. Brass, reversible. Projection 12mm.
DEADBOLT. Brass, with two hardened steel rollers. Throw 14mm
FOLLOWER. Brass, to suit 8mm square spindle. One-way action. Sprung to suit sprung lever handle furniture. For unsprung lever handle furniture heavy duty springing should be specified.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key either side such as Guardian G9001
b) Turn inside and key outside such as Guardian G9002

REBATE UNITS
TO SUIT:
G3051-13mm G3052-19mm G3053-25mm

 
 E7000     Euro-profile cylinder mortice sashlock
OPERATION: Latchbolt operated by lever handle from either side. Deadbolt operated by key from either side using a double cylinder or by key outside and thumb turn inside using a single cylinder with turn.
SPECIFICATION:
CASE.
Pierced to accept 20mm centre bolt through fixing escutcheons. 76mm and 101mm sizes pierced to accept 38mm centre horizontally and diagonally opposed bolt through fixing furniture;
63mm size pierced diagonally only.
STRIKER PLATE. Type A.
LATCHBOLT. Brass, reversible. Projection 12mm.
DEADBOLT. Brass, with two hardened steel rollers. Throw 14mm
FOLLOWER. Brass, to suit 8mm square spindle. One-way action. Sprung to suit sprung lever handle furniture. For unsprung lever handle furniture heavy duty springing should be specified.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key either side such as Guardian G9001
b) Turn inside and key outside such as Guardian G9002

REBATE UNITS
TO SUIT:
G3051-13mm G3052-19mm G3053-25mm

 

 
 G7002 Y7002      Euro-profile cylinder mortice roller bolt sashlock
OPERATION: Roller bolt operated by lever handle from either side. Deadbolt operated by key from either side using a double cylinder or by key outside and thumb turn inside using a single cylinder with turn.
SPECIFICATION:
CASE.
Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons. 76mm and 101mm sizes pierced to accept 38mm centre horizontally and diagonally opposed bolt through fixing furniture;
63mm size pierced diagonally only.
STRIKER PLATE. Type A.
LATCHBOLT. Brass, roller bolt to suit either hand. Projection 12mm.
DEADBOLT. Brass, with two hardened steel rollers. Throw 14mm
FOLLOWER. Brass, to suit 8mm square spindle. One-way action. Sprung to suit sprung lever handle furniture. For unsprung lever handle furniture heavy duty springing should be specified.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key either side such as Guardian G9001
b) Turn inside and key outside such as Guardian G9002

REBATE UNITS
TO SUIT:
G3051-13mm G3052-19mm G3053-25mm

 

 
 E7002     Euro-profile cylinder mortice roller bolt sashlock
OPERATION: Roller bolt operated by lever handle from either side. Deadbolt operated by key from either side using a double cylinder or by key outside and thumb turn inside using a single cylinder with turn.
SPECIFICATION:
CASE.
Pierced to accept 20mm centre bolt through fixing escutcheons. 76mm and 101mm sizes pierced to accept 38mm centre horizontally and diagonally opposed bolt through fixing furniture;
63mm size pierced diagonally only.
STRIKER PLATE. Type A.
LATCHBOLT. Brass, roller bolt to suit either hand. Projection 12mm.
DEADBOLT. Brass, with two hardened steel rollers. Throw 14mm
FOLLOWER. Brass, to suit 8mm square spindle. One-way action. Sprung to suit sprung lever handle furniture. For unsprung lever handle furniture heavy duty springing should be specified.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key either side such as Guardian G9001
b) Turn inside and key outside such as Guardian G9002

REBATE UNITS
TO SUIT:
G3051-13mm G3052-19mm G3053-25mm

 

 

 
 G7004     Euro-profile cylinder mortice deadlock
OPERATION: Deadbolt operated by key from either side using a double cylinder or by key outside and thumb turn inside using a single cylinder with turn.
SPECIFICATION:
CASE.
Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons.
STRIKER PLATE. Type C.
   
DEADBOLT. Brass, with two hardened steel rollers. Throw 14mm
   
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key either side such as Guardian G9001
b) Turn inside and key outside such as Guardian G9002

REBATE UNITS
TO SUIT:
G3054-13mm G3055-19mm G3056-25mm

 

 

 

 
 SC7004     Euro-profile cylinder mortice deadlock
OPERATION: Deadbolt operated by key from either side using a double cylinder or by key outside and thumb turn inside using a single cylinder with turn.
SPECIFICATION:
CASE.
Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons.
STRIKER PLATE. Type C.
   
DEADBOLT. Brass, with two hardened steel rollers. Throw 14mm
   
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key either side such as Guardian G9001
b) Turn inside and key outside such as Guardian G9002

REBATE UNITS
TO SUIT:
DL/G3051-13mm DL/G3052-19mm DL/G3053-25mm

 

 

 

 

 
 G7006     Euro-profile cylinder mortice sliding door lock
OPERATION: Bolt operated by key from either side using a double cylinder or by key outside and thumb turn inside using a single cylinder with turn.
SPECIFICATION:
CASE.
Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons.
STRIKER PLATE. Type C.
   
DEADBOLT. Brass, expanded claw. Throw 14mm
   
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key either side such as Guardian G9001
b) Turn inside and key outside such as Guardian G9002

REBATE UNITS
TO SUIT:
G3054-13mm G3055-19mm G3056-25mm

 

 

 

 

 

 
 SC7006     Euro-profile cylinder mortice sliding door lock
OPERATION: Bolt operated by key from either side using a double cylinder or by key outside and thumb turn inside using a single cylinder with turn.
SPECIFICATION:
CASE.
Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons.
STRIKER PLATE. Type C.
   
DEADBOLT. Brass, expanded claw. Throw 14mm
   
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key either side such as Guardian G9001
b) Turn inside and key outside such as Guardian G9002

REBATE UNITS
TO SUIT:
DL/G3051-13mm DL/G3052-19mm DL/G3053-25mm

 

 

 

 

 

 

 
 G7007     Euro-profile cylinder mortice escape deadlock
OPERATION: In standard one-way action, deadbolt thrown or withdrawn by key from either side and withdrawn by lever handle or turn knob from inside.
Two-way action thrown or withdrawn by key or handle from either side.
SPECIFICATION:
CASE.
Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons.
STRIKER PLATE. Type C.
   
DEADBOLT. Brass, with two hardened steel rollers. Throw 13mm
FOLLOWER. Brass, to suit 8mm square spindle. One-way action as standard.
Two-way action available on request.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key one side such as Guardian G9000
b) Key either side such as Guardian G9001
REBATE UNITS
TO SUIT:
DL/G3051-13mm DL/G3052-19mm DL/G3053-25mm

 

 

 

 

 

 

 

 
 G7008     Euro-profile cylinder mortice night latch
OPERATION: Latchbolt operated by key from outside and lever handle or turn knob from inside.
SPECIFICATION:
CASE.
Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons. Pierced to accept 38mm centre diagonally opposed bolt through fixing furniture.
STRIKER PLATE. Type E.
LATCHBOLT. Brass. Projection 12mm. Hand must be specified.
Also available with non-handed roller bolt.
   
FOLLOWER. Brass, to suit 8mm square spindle. One-way action sprung to suit sprung lever handle furniture.
For unsprung lever handle furniture heavy duty springing should be specified.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key outside such as Guardian G9000
REBATE UNITS
TO SUIT:
G3051-13mm G3052-19mm G3053-25mm

 

 

 

 

 

 

 

 

 
 Y7008 E7008      Euro-profile cylinder mortice night latch
OPERATION: Latchbolt operated by key from outside and lever handle or turn knob from inside.
SPECIFICATION:
CASE.
Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons. Pierced to accept 38mm centre diagonally opposed bolt through fixing furniture.
STRIKER PLATE. Type E.
LATCHBOLT. Brass. Projection 12mm. Hand must be specified.
Also available with non-handed roller bolt.
   
FOLLOWER. Brass, to suit 8mm square spindle. One-way action sprung to suit sprung lever handle furniture.
For unsprung lever handle furniture heavy duty springing should be specified.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key outside such as Guardian G9000
REBATE UNITS
TO SUIT:
G3051-13mm G3052-19mm G3053-25mm

 

 

 

 

 

 

 

 

 

 
 G7008HB     Euro-profile cylinder mortice night latch
OPERATION: Latchbolt operated by key from outside and lever handle or turn knob from inside. The bolt may be held in the withdrawn position by means of a reverse turn of the key.
SPECIFICATION:
CASE.
Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons. Pierced to accept 38mm centre diagonally opposed bolt through fixing furniture.
STRIKER PLATE. Type E.
LATCHBOLT. Brass. Projection 12mm. Hand must be specified.

Also Available with non-handed roller bolt.
   
FOLLOWER. Brass, to suit 8mm square spindle. One-way action sprung to suit sprung lever handle furniture.
For unsprung lever handle furniture heavy duty springing should be specified.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key outside such as Guardian G9000
REBATE UNITS
TO SUIT:
G3051-13mm G3052-19mm G3053-25mm

 

 

 

 

 

 

 

 

 

 

 
 Y7008HB E7008HB      Euro-profile cylinder mortice night latch
OPERATION: Latchbolt operated by key from outside and lever handle or turn knob from inside. The bolt may be held in the withdrawn position by means of a reverse turn of the key.
SPECIFICATION:
CASE.
Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons. Pierced to accept 38mm centre diagonally opposed bolt through fixing furniture.
STRIKER PLATE. Type E.
LATCHBOLT. Brass. Projection 12mm. Hand must be specified.

Also Available with non-handed roller bolt.
   
FOLLOWER. Brass, to suit 8mm square spindle. One-way action sprung to suit sprung lever handle furniture.
For unsprung lever handle furniture heavy duty springing should be specified.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key outside such as Guardian G9000
REBATE UNITS
TO SUIT:
G3051-13mm G3052-19mm G3053-25mm

 

 

 

 

 

 

 

 

 

 
 G7009     Euro-profile cylinder mortice night latch
OPERATION: Latchbolt operated by key from outside and lever handle or turn knob from inside using a single cylinder or by key from either side using a double cylinder. Bolt and handle may be deadlocked by key from either side.
SPECIFICATION:
CASE.
Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons. Pierced to accept 38mm centre diagonally opposed bolt through fixing furniture.
STRIKER PLATE. Type E.
LATCHBOLT. Brass. Projection 12mm. Hand must be specified.
Also available with non-handed roller bolt.
   
FOLLOWER. Brass, to suit 8mm square spindle. One-way action sprung to suit sprung lever handle furniture.
For unsprung lever handle furniture heavy duty springing should be specified.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key outside such as Guardian G9000
b) Key either side such as Guardian G9001
REBATE UNITS
TO SUIT:
G3051-13mm G3052-19mm G3053-25mm

 

 

 

 

 

 

 

 

 

 
 Y7009 E7009      Euro-profile cylinder mortice night latch
OPERATION: Latchbolt operated by key from outside and lever handle or turn knob from inside using a single cylinder or by key from either side using a double cylinder. Bolt and handle may be deadlocked by key from either side.
SPECIFICATION:
CASE.
Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons. Pierced to accept 38mm centre diagonally opposed bolt through fixing furniture.
STRIKER PLATE. Type E.
LATCHBOLT. Brass. Projection 12mm. Hand must be specified.
Also available with non-handed roller bolt.
   
FOLLOWER. Brass, to suit 8mm square spindle. One-way action sprung to suit sprung lever handle furniture.
For unsprung lever handle furniture heavy duty springing should be specified.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key outside such as Guardian G9000
b) Key either side such as Guardian G9001
REBATE UNITS
TO SUIT:
G3051-13mm G3052-19mm G3053-25mm

 

 

 

 

 

 

 

 

 

 
 G7010     Euro-profile cylinder mortice night latch
OPERATION: Latchbolt operated by key either side and lever handle or turn knob from inside using a double cylinder.
Deadbolt operated by key from either side using a double cylinder or by key outside and thumbturn inside using a single cylinder with turn.
SPECIFICATION:
CASE.
Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons. Pierced to accept 38mm centre diagonally opposed bolt through fixing furniture.
STRIKER PLATE. Type A.
LATCHBOLT. Brass. Projection 12mm. Hand must be specified.
Also available with non-handed roller bolt.
DEADBOLT. Brass, with two hardened steel rollers. Throw 14mm.
FOLLOWER. Brass, to suit 8mm square spindle. One-way action sprung to suit sprung lever handle furniture.
For unsprung lever handle furniture heavy duty springing should be specified.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key either side such as Guardian G9001
b) Turn inside and key outside such as Guardian G9002
REBATE UNITS
TO SUIT:
G3051-13mm G3052-19mm G3053-25mm

 

 

 

 

 

 

 

 

 

 
 Y7010 E7010     Euro-profile cylinder mortice night latch
OPERATION: Latchbolt operated by key either side and lever handle or turn knob from inside using a double cylinder.
Deadbolt operated by key from either side using a double cylinder or by key outside and thumb turn inside using a single cylinder with turn.
SPECIFICATION:
CASE.
Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons. Pierced to accept 38mm centre diagonally opposed bolt through fixing furniture.
STRIKER PLATE. Type A.
LATCHBOLT. Brass. Projection 12mm. Hand must be specified.
Also available with non-handed roller bolt.
DEADBOLT. Brass, with two hardened steel rollers. Throw 14mm.
FOLLOWER. Brass, to suit 8mm square spindle. One-way action sprung to suit sprung lever handle furniture.
For unsprung lever handle furniture heavy duty springing should be specified.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key either side such as Guardian G9001
b) Turn inside and key outside such as Guardian G9002
REBATE UNITS
TO SUIT:
G3051-13mm G3052-19mm G3053-25mm

 

 

 

 

 

 

 

 

 

 
 G7011    Euro-profile cylinder horizontal mortice lock
OPERATION: Latchbolt operated by knob from either side.
Deadbolt operated by key from either side using a double cylinder or by key outside and thumb turn inside using a single cylinder with turn.
SPECIFICATION:
CASE.
Pierced to accept 20mm centre bolt through fixing escutcheons. Pierced to accept 38mm centre horizontally opposed bolt through fixing furniture.
STRIKER PLATE. Type B.
LATCHBOLT. Brass, reversible. Projection 12mm.
DEADBOLT. Brass, with two hardened steel rollers. Throw 14mm.
FOLLOWER. Brass, to suit 8mm square spindle. Two-way action. Sprung to suit knob furniture only.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key either side such as Guardian G9001
b) Turn inside and key outside such as Guardian G9002
REBATE UNITS
TO SUIT:
G3057-13mm G3058-19mm G3059-25mm

 

 

 

 

 

 

 

 

 

 
 G7012    Euro-profile cylinder horizontal mortice lock
OPERATION: Latchbolt operated by knob from either side.
Deadbolt operated by key from either side using a double cylinder or by key outside and thumb turn inside using a single cylinder with turn.
SPECIFICATION:
CASE.
Pierced to accept 20mm centre bolt through fixing escutcheons. Pierced to accept 38mm centre horizontally opposed bolt through fixing furniture.
STRIKER PLATE. Type B.
LATCHBOLT. Brass, reversible. Projection 12mm.
DEADBOLT. Brass, with two hardened steel rollers. Throw 14mm.
FOLLOWER. Brass, to suit 8mm square spindle. Two-way action. Sprung to suit knob furniture only.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key either side such as Guardian G9001
b) Turn inside and key outside such as Guardian G9002
REBATE UNITS
TO SUIT:
G3057-13mm G3058-19mm G3059-25mm

 

 

 

 

 

 

 

 

 

 
 G7018    Euro-profile cylinder horizontal mortice night latch
OPERATION: Latchbolt operated by key from either side and knob from inside using a double cylinder.
Deadbolt operated by key from either side using a double cylinder or by key outside and thumb turn inside using a single cylinder with turn.
SPECIFICATION:
CASE.
Pierced to accept 20mm centre bolt through fixing escutcheons. Pierced to accept 38mm centre horizontally opposed bolt through fixing furniture.
STRIKER PLATE. Type B.
LATCHBOLT. Brass, reversible. Projection 12mm.
DEADBOLT. Brass, with two hardened steel rollers. Throw 14mm.
FOLLOWER. Brass, to suit 8mm square spindle. Two-way action sprung to suit knob furniture only.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key either side such as Guardian G9001
b) Turn inside and key outside such as Guardian G9002
REBATE UNITS
TO SUIT:
G3057-13mm G3058-19mm G3059-25mm

 

 

 

 

 

 

 

 

 

 
 G7072    Euro-profile cylinder mortice heavy duty roller bolt sashlock
OPERATION: Roller bolt operated by push or pull from either side. Deadbolt operated by key from either side using a double cylinder or by key outside and thumb turn inside using a single cylinder with turn.
SPECIFICATION:
CASE.
Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons.
STRIKER PLATE. Type D.
LATCHBOLT. Brass, adjustable roller bolt to suit either hand.
DEADBOLT. Brass, with two hardened steel rollers. Throw 14mm
   
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key either side such as Guardian G9001
b) Turn inside and key outside such as Guardian G9002

REBATE UNITS
TO SUIT:
PP/G3051-13mm PP/G3052-19mm PP/G3053-25mm

 

 

 
 G7254    Compact euro-profile cylinder mortice deadlock
OPERATION: Deadbolt operated by key from either side using a double cylinder or by key outside and thumb turn inside using a single cylinder with turn.
SPECIFICATION:
CASE.
Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons.
STRIKER PLATE. Box, Type M.
   
DEADBOLT. Stainless steel. Throw 25mm.
   
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key either side such as Guardian G9001
b) Turn inside and key outside such as Guardian G9002

REBATE UNITS
TO SUIT:
G3070-13mm G3071-19mm G3072-25mm

 

 

 
 G7040    Euro-profile cylinder upside down mortice sashlock
OPERATION: Latchbolt operated by lever handle from either side. Deadbolt operated by key from either side using a double cylinder or by key outside and thumb turn inside using a single cylinder with turn.
SPECIFICATION:
CASE.
Pierced to accept 20mm centre bolt through fixing escutcheons.
Pierced to accept 38mm centre horizontally opposed bolt through fixing furniture.
STRIKER PLATE. Type A.
LATCHBOLT. Brass, reversible. Projection 12mm.
DEADBOLT. Brass, with two hardened steel rollers. Throw 14mm
FOLLOWER. Brass, to suit 8mm square spindle. One-way action. Sprung to suit sprung lever handle furniture only.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key either side such as Guardian G9001
b) Turn inside and key outside such as Guardian G9002

REBATE UNITS
TO SUIT:
G3051-13mm G3052-19mm G3053-25mm

 

 
 G7020    BS3621 British standard euro-profile cylinder heavy duty mortice sashlock
OPERATION: Latchbolt operated by lever handle from either side. Deadbolt operated by key from either side.
SPECIFICATION:
CASE.
Hardened steel. Pierced to accept 20mm centre bolt through fixing escutcheons. Pierced to accept 38mm centre horizontally opposed bolt through fixing furniture.
STRIKER PLATE. Box. Type Q.
LATCHBOLT. Brass, reversible. Projection 12mm.
DEADBOLT. Solid hardened steel . Throw 25mm
FOLLOWER. Brass, to suit 8mm square spindle. One-way action. Sprung to suit sprung lever handle furniture only.
CYLINDER.

Supplied on request. Successfully type-tested for conformity to all of the requirements of BS3621:1998 Thief Resistant Locks when fitted with Kaba Quattro double cylinder and G9527 security escutcheons.

REBATE UNITS
TO SUIT:
Not available.

 

 
 G7024    BS3621 British standard euro-profile cylinder heavy duty mortice deadlock
OPERATION: Deadbolt operated by key from either side.
SPECIFICATION:
CASE.
Hardened steel. Pierced to accept 20mm centre bolt through fixing escutcheons.
STRIKER PLATE. Box. Type M.
   
DEADBOLT. Solid hardened steel . Throw 25mm
   
CYLINDER.

Supplied on request. Successfully type-tested for conformity to all of the requirements of BS3621:1998 Thief Resistant Locks when fitted with Kaba Quattro double cylinder and G9527 security escutcheons.

REBATE UNITS
TO SUIT:
Hand must be specified.
G3064-13mm G3065-19mm G3066-25mm

 

 
 G7030    BS3621 British standard euro-profile cylinder mortice sashlock
OPERATION: Latchbolt operated by lever handle from either side. Deadbolt operated by key from either side.
SPECIFICATION:
CASE.
Hardened steel. Pierced to accept 20mm centre bolt through fixing escutcheons. Pierced to accept 38mm centre horizontally opposed bolt through fixing furniture.
STRIKER PLATE. Box. Type K.
LATCHBOLT. Brass, easily reversible. Projection 12mm.
DEADBOLT. Brass, with two hardened steel rollers. Throw 16mm
FOLLOWER. Brass, to suit 8mm square spindle. One-way action. Sprung to suit sprung lever handle furniture only.
CYLINDER.

Supplied upon request. Successfully type-tested for conformity to all of the requirements of BS3621:1998 Thief Resistant Locks when fitted with Kaba AP2000 double cylinder and G9527 security escutcheons.

REBATE UNITS
TO SUIT:
G3067-13mm G3068-19mm G3069-25mm

 

 
 G7034    BS3621 British standard euro-profile cylinder mortice deadlock
OPERATION: Deadbolt operated by key from either side.
SPECIFICATION:
CASE.
Hardened steel. Pierced to accept 20mm centre bolt through fixing escutcheons.
STRIKER PLATE. Box, Type M.
   
DEADBOLT. Brass, with two hardened steel rollers. Throw 16mm.
   
CYLINDER.

Supplied upon request. Successfully type-tested for conformity to all of the requirements of BS3621:1998 Thief Resistant Locks when fitted with Kaba AP2000 double cylinder and G9527 security escutcheons.

REBATE UNITS
TO SUIT:
G3070-13mm G3071-19mm G3072-25mm

 

 

 
 S9050    Euro-profile cylinder aluminium door mortice sashlock
OPERATION: Latchbolt operated by lever handle from either side and by key from either side using double cylinder.
Deadbolt operated by key from either side using a double cylinder or by key outside and thumb turn inside using a single cylinder with turn.
SPECIFICATION:
FOREND.
Single. Stainless steel finish only. Not available round end.
STRIKER PLATE. Not supplied.
LATCHBOLT. Brass, reversible. Projection 11mm.
DEADBOLT. Steel, laminated. Throw 14mm.
FOLLOWER. Brass, to suit 8mm square spindle. One-way action sprung to suit sprung lever handle furniture only.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key either side such as Guardian G9001
b) Turn inside and key outside such as Guardian G9002
ESCUTCHEONS. Black plastic. Two supplied.
REBATE UNITS
TO SUIT:
Not available.

 

 

 

 

 

 

 

 

 

 
 S9054    Euro-profile cylinder aluminium door mortice deadlock
OPERATION: Deadbolt operated by key from either side using a double cylinder or by key outside and thumb turn inside using a single cylinder with turn.
SPECIFICATION:
FOREND.
Single. Stainless steel finish only. Not available round end.
STRIKER PLATE. Not supplied. Available on request, type C.
   
DEADBOLT. Steel, laminated. Throw 14mm.
   
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key either side such as Guardian G9001
b) Turn inside and key outside such as Guardian G9002
ESCUTCHEONS. Black plastic. Two supplied.
REBATE UNITS
TO SUIT:
Not available.

 

 

 

 

 

 

 

 

 

 
 G7088    Dual-profile cylinder mortice night latch with anti-thrust bolt
OPERATION: Latchbolt operated by key from outside and lever handle or turn knob inside using a single cylinder or by key from either side using a double cylinder. When the door is shut the bolt is locked against end pressure. The bolt may be held in the withdrawn position by means of a reverse turn of the key. Use with turn operated cylinders is not recommended.
SPECIFICATION:
CASE.
Pierced to accept 38mm centre horizontally opposed bolt through fixing furniture.
STRIKER PLATE. Type W.
LATCHBOLT. Brass, reversible. Projection 12mm.
ANTI-THRUST SLIDE. Brass effective at door gaps up to 6mm.
FOLLOWER. Brass, to suit 8mm square spindle. One-way action sprung to suit sprung lever handle furniture only.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key outside such as Guardian G9000 or G9010
b) Key either side such as Guardian G9001 or G9011

REBATE UNITS
TO SUIT:
G3073-13mm  G3074-19mm  G3075-25mm  Handing must be specified

 

 

 

 

 

 

 

 

 

 
 G7788    Euro-profile cylinder mortice night latch
OPERATION: Latchbolt operated by key from outside and turn knob inside using a single cylinder or by key from either side using a double cylinder. The bolt may be held in the withdrawn position by a snib in the forend. Use with turn operated cylinders is not recommended.
STRIKER PLATE. Type W.
LATCHBOLT. Brass, reversible. Projection 12mm.
FOLLOWER. Brass, to suit 8mm square spindle. One-way action. Not suitable for use with unsprung lever handle furniture.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key outside side such as Guardian G9000
b) Key either side such as Guardian G9001
REBATE UNITS
TO SUIT:
On application